Home / KStrong / KStrong Uff4000 Impact Series Engineered Horizontal Lifelines For Roof Deck, Wall/Column And Ceiling Mount Applications

  • Kstrong Uff4000 Impact Series Engineered Horizontal Lifelines For Roof Deck, Wall/Column And Ceiling Mount Applications
1 5

KStrong

KStrong Uff4000 Impact Series Engineered Horizontal Lifelines For Roof Deck, Wall/Column And Ceiling Mount Applications

KStrong Uff4000 Impact Series Engineered Horizontal Lifelines For Roof Deck, Wall/Column And Ceiling Mount Applications

UFF4000

$0.00
$0.00
/ EA
Sale Sold out
Shipping calculated at checkout.
  • The IMPACT Cable Line Fall Arrest System meets all applicable OSHA codes and ANSIstandards and is certified to EN795:2012 Type A, B, C, and CEN/TS 16415:2013. It is suitable forup to four users simultaneously. It is also being certified by Sira (Certification Number:11ATEX6276X) for ATEX to comply with use in explosive atmospheres which conforms toNorms EN 13463-1:2009 and EN 13463-5:2003. Shuttle conforms and is certified to EN795:2012Type B anchor device.
  • Flexible anchor line with linear elastic performance properties with a defined elasticcoefficient. The impact load generated by a fall arrest event will not exceed 2,248 lbs. (10Kn)as applied to the structure. Energy absorber can absorb up to 5,753ft./lbs. (7800 joules).
  • The fall arrest system will be suitable for unrestricted use by up to four users at any one timeand any point along the length of the system including between two anchor brackets.
  • The rooftop anchor post is manufactured from 316 stainless steel, 6061 T6 Aluminum, 6005T5 Aluminum which suitable for metal roof and PEB structures.
  • The span distance shall be between 40 ft. (12m) to 50 ft. (15m) between end, corner, andintermediate anchor brackets.
  • Wire Rope to be 8mm 7 x 19 and 7 x 7 316 stainless steel wire cable with a 7,643 lbf. (34Kn)minimum breaking load.
  • The swage termination is manufactured from 316 stainless steel. The swaging is done usinga 29,225 lbf. (130kn) hydraulic swaging hand tool and hexlock dies at 6 positions.
  • Extremity, corner, and intermediate brackets manufactured from 316 stainless steel.
  • Labeled according to applicable ANSI and EN 365:2004 General requirements for instructionfor use, maintenance, periodic examination, repair, marking, and packaging in accordancewith OSHA, ANSI and EN365.
  • System Design, application, installation, maintenance, repair, annual inspection, andcertification undertaken only by KStrong Registered Installers. Details provided upon request

Shipping & Returns

FREE SHIPPING ON ORDERS OF $250+!

Shipping charges are equal to 20% of the value of your order and will be added to your invoice if your order totals less than $250 (not including tax). The minimum shipping charge for orders under $250 is $14.99. Any items that are backordered on orders that qualify for free freight will be shipped without freight charges. We cannot ship to P.O. Boxes. Shipments to residential or limited access addresses are subject to additional charges that will be added to the invoice. Any additional freight charges that are incurred due to delivery conditions or preferences could be billed after the order has been received.

ITEMS THAT ARE DESIGNATED AS PLUS FREIGHT ITEMS ARE NOT ELIGIBLE FOR FREE SHIPPING. A FREIGHT QUOTE WILL BE PROVIDED TO YOU FOR APPROVAL.

View full details